Multi-function emergency light

Detailed Product Description

1.As the situation is emergent, you can use it to break the glass of the door in the car.

2.You can use it to cut off the safety belt.

3.You can use it as emergency signal light.

4.In the darkness, it can be used as flashlight.

5.Seat belt cutterIf you cannot untie the belt for any accident,just use the product to cut off the

belt referring to the figure.

6.Glass hammerIf you cannot open the door for any accident,just use the product to break the glass.

7.Emergency signal lightTake the body down from the stand, and the red LED will flash automatically just like emergency signal light.

8.Flashlight Turn on the flashlight, and it can throw light on when you work at light.

9.The installation of the stand (refer to the following figure)

a.Pull out the pin(A)in the inner side of the stand, and then stick it into the blanket in the car.
b.Push out the pin(B)fix the stand well.

10.Set the body in the stand referring to the figure.

11.Instruction of switcha.After take body down from the stand,the red LED will flash automatically.b.As the body is set in the stand, the flashlight and emergency signal light are
all "OFF"

12.Installation of batteryRotate the battery cover leftward to open, and then insert the battery.

13.Replacement and collection to the bulb.

a.Rotate the cover leftward to open, and then replace the new bulb(do not insert the new bulb forcefully so as to avoid any damage)
b.Rotate the battery cover leftward to open, and collect the prepared bulb inside
after pull out the battery joint bar.

Size:180*40mm